Advantages and disadvantages of disc brake
The brake disk is divided into two parts and contains small holes for better cooling. Another component is the caliper which consists of caliper piston (center) on both sides.
These two parts receive the most wear are your brake pads and rotors and should be inspected regularly.
To ensure safety, you should regularly inspect every part of your vehicle’s ongoing maintenance. In case you feel, your brake disk is not functioning properly; you can get the best maintenance and inspection Brake disk in Dubai.
Disk brake working principle
Generally, there are forty parts in your vehicles braking system, approximately. Brake pads are made up of fibrous material that gradually wears away each time you apply your brakes. The rotors are metal discs, which also wear, but at a slower rate.
In addition to normal wear, brake pads can become loose, cracked or broken, and disc rotors can become grooved, pitted or warped from the continual heat and pressure from the braking.
Types of Disk brake system
Single piston: The brake pads in single piston are attached to the brake caliper. Pressing the lever, brake oil pushes the piston causing the brake pads to contract and rub against the disc. Therefore, the wheel stops due to the resistance generated between the brake pads causing the disc to stop rotating. Further, when you release the brake lever, the pads repel to their original position.
Twin Piston: The brake is applied to push the brake pad which is usually done by twin piston. These brake pads hold the entire system of brake together. When you press this brake pedal, the piston contacts, and rubs against the disc, thereby stopping the wheel.
Twin caliper: This system is operated by two calipers. It works on the same standard as that of a single caliper brake system. Mainly, instead of two, there are two calipers. Hence, any high-speed vehicle is more commonly employ of this system as it provides more efficient braking.
Advantages of the brake disk
- Quick to the replacement of pads
- No modification is required
- They don’t wear out the rim
- Disk brakes require fewer efforts
- They grab better when wet
Disadvantages of the brake disk
- They require the wheels to be dished, which leads to a weaker wheel.
- Low-end disc brake systems are even more finicky and may not survive a single off-road descent without getting warped.
- Disc brakes are heavier.
- High braking force is required in comparison to drum brake.